Hegel HD2 – edullinen USB-DA-muunnin tietokoneellesi

Paranna tietokoneesi äänenlaatua hyvin yksinkertaisella tavalla. HD2 toimii myös jitterin vähentäjänä muuttamalla USB-annon digitaalisignaalin koaksiaaliseksi S/PDIF-signaaliksi. Laite saa virtansa USB-liitännästä eikä tarvitse erillistä virtalähdettä.

Connecting to an analog audio amplifier:
1) Connect an RCA audio cable to the L+R “Analog Output” terminals on
the HD2, and to the inputs of your amplifier. NOTE: Do not connect to
inputs named “phono”, “Main-in” or “Home Theatre”. If in doubt consult
the manual for your amplifier.
Connecting to a pair of active loudspeakers:
1) Make sure the computer’s volume control is set to its minimum setting
2) Connect the speakers to the “Analog Output” terminals on your HD2.
3) Start playing music and adjust the volume on the computer to your
desired level.
Connecting to the digital input of an amplifier or other DAC:
1) Connect an Coaxial digital cable to the “Digital Output” terminal on
the HD2, and to a coaxial digital input on your amplifier or Dac.
2) You are ready to play

DAC resolution 24bit 192KHz multilevel sigma-delta DAC
0dBFS signal output 1V RMS
Digital inputs USB digital input
Digital outputs Gold plated spdif coaxial digital out (RCA)
Analog outputs Gold plated RCA / phono unbalanced
Frequency response 0Hz-50kHz
Phase response Linear Phase analog filter
Noise floor minus 120dB
Distortion Less than 0.005%
Power supply Power over USB
Dimensions / Weight 5cm x 9,8cm x 12cm (HxWxD) / 1 kg (net)